Reflectance Measurement Method Based on Sensor Fusion of Frame-Based Hyperspectral Imager and Time-of-Flight Depth Camera
Rahkonen, S., Lind, L., Raita-Hakola, A.-M., Kiiskinen, S., & Pölönen, I. (2022). Reflectance Measurement Method Based on Sensor Fusion of Frame-Based Hyperspectral Imager and Time-of-Flight Depth Camera. Sensors, 22(22), Article 8668. https://doi.org/10.3390/s22228668
Julkaistu sarjassa
SensorsTekijät
Päivämäärä
2022Oppiaine
Computing, Information Technology and MathematicsTietotekniikkaLaskennallinen tiedeComputing, Information Technology and MathematicsMathematical Information TechnologyComputational ScienceTekijänoikeudet
© 2022 by the authors. Licensee MDPI, Basel, Switzerland.
Hyperspectral imaging and distance data have previously been used in aerial, forestry, agricultural, and medical imaging applications. Extracting meaningful information from a combination of different imaging modalities is difficult, as the image sensor fusion requires knowing the optical properties of the sensors, selecting the right optics and finding the sensors’ mutual reference frame through calibration. In this research we demonstrate a method for fusing data from Fabry–Perot interferometer hyperspectral camera and a Kinect V2 time-of-flight depth sensing camera. We created an experimental application to demonstrate utilizing the depth augmented hyperspectral data to measure emission angle dependent reflectance from a multi-view inferred point cloud. We determined the intrinsic and extrinsic camera parameters through calibration, used global and local registration algorithms to combine point clouds from different viewpoints, created a dense point cloud and determined the angle dependent reflectances from it. The method could successfully combine the 3D point cloud data and hyperspectral data from different viewpoints of a reference colorchecker board. The point cloud registrations gained 0.29–0.36 fitness for inlier point correspondences and RMSE was approx. 2, which refers a quite reliable registration result. The RMSE of the measured reflectances between the front view and side views of the targets varied between 0.01 and 0.05 on average and the spectral angle between 1.5 and 3.2 degrees. The results suggest that changing emission angle has very small effect on the surface reflectance intensity and spectrum shapes, which was expected with the used colorchecker.
...
![showless](/themes/JYX2//images/showless.png)
![showmore](/themes/JYX2//images/showmore.png)
Julkaisija
MDPI AGISSN Hae Julkaisufoorumista
1424-8220Asiasanat
Julkaisu tutkimustietojärjestelmässä
https://converis.jyu.fi/converis/portal/detail/Publication/159522027
Metadata
Näytä kaikki kuvailutiedotKokoelmat
Rahoittaja(t)
Pirkanmaan liittoRahoitusohjelmat(t)
EAKR Euroopan aluekehitysrahasto, React-EULisätietoja rahoituksesta
The work is related to the iADDVA—Adding Value by Creative Industry Platform project that has received funding from Council of Tampere Region (Decision number: A77069) and European Regional Development Fund React-EU (2014–2023) and Leverage from the EU 2014–2020. This project has been funded with support from the European Commission.Lisenssi
Samankaltainen aineisto
Näytetään aineistoja, joilla on samankaltainen nimeke tai asiasanat.
-
LoRa-Based Sensor Node Energy Consumption with Data Compression
Väänänen, Olli; Hämäläinen, Timo (IEEE, 2021)In this paper simple temporal compression algorithms' efficiency to reduce LoRa-based sensor node energy consumption has been evaluated and measured. It is known that radio transmission is the most energy consuming operation ... -
Offline commissioning of the multi-reflection time-of-flight mass separator at JYFLTRAP
Virtanen, Ville (2019)Tässä työssä esitellään Jyväskylän yliopiston kiihdytinlaboratoriossa sijaitsevaan IGISOL-laitokseen rakennetun moniheijastavan lentoaika-massaerottajan (engl. Multi- Reflection Time-of-Flight mass separator, MR-ToF-ms) ... -
High-resolution, accurate multiple-reflection time-of-flight mass spectrometry for short-lived, exotic nuclei of a few events in their ground and low-lying isomeric states
Andrés, Samuel Ayet San; Hornung, Christine; Ebert, Jens; Plaß, Wolfgang R.; Dickel, Timo; Geissel, Hans; Scheidenberger, Christoph; Bergmann, Julian; Greiner, Florian; Haettner, Emma; Jesch, Christian; Lippert, Wayne; Mardor, Israel; Miskun, Ivan; Patyk, Zygmunt; Pietri, Stephane; Pihktelev, Alexander; Purushothaman, Sivaji; Reiter, Moritz P.; Rink, Ann-Kathrin; Weick, Helmut; Yavor, Mikhail I.; Bagchi, Soumya; Charviakova, Volha; Constantin, Paul; Diwisch, Marcel; Finlay, Andrew; Kaur, Satbir; Knöbel, Ronja; Lang, Johannes; Mei, Bo; Moore, Iain; Otto, Jan-Hendrik; Pohjalainen, Ilkka; Prochazka, Andrej; Rappold, Christophe; Takechi, Maya; Tanaka, Yoshiki K.; Winfield, John S.; Xu, Xiaodong (American Physical Society, 2019)Mass measurements of fission and projectile fragments, produced via 238 U and 124 Xe primary beams, have been performed with the multiple-reflection time-of-flight mass spectrometer (MR-TOF-MS) of the Fragment ... -
First spatial separation of a heavy ion isomeric beam with a multiple-reflection time-of-flight mass spectrometer
Dickel, T.; Plaß, W.R.; Andres, S. Ayet San; Ebert, J.; Geissel, H.; Haettner, E.; Hornung, C.; Miskun, I.; Pietri, S.; Purushothaman, S.; Reiter, M.P.; Rink, A.-K.; Scheidenberger, C.; Weick, H.; Dendooven, P.; Diwisch, M.; Greiner, F.; Heiße, F.; Knöbel, R.; Lippert, W.; Moore, Iain; Pohjalainen, Ilkka; Prochazka, A.; Ranjan, M.; Takechi, M.; Winfield, J.S.; Xu, X. (Elsevier BV * North-Holland, 2015)211Po ions in the ground and isomeric states were produced via 238U projectile fragmentation at 1000 MeV/u. The 211Po ions were spatially separated in flight from the primary beam and other reaction products by the ... -
Nanodevices by DNA based gold nanostructures
Tapio, Kosti (University of Jyväskylä, 2017)In this thesis DNA based structures were utilized to create gold nanostructures for nanosensing and nanoelectronic applications. In the past, both of these fields have been dominated by the conventional lithography methods, ...
Ellei toisin mainittu, julkisesti saatavilla olevia JYX-metatietoja (poislukien tiivistelmät) saa vapaasti uudelleenkäyttää CC0-lisenssillä.