Application of Direct Laser Writing for the Fabrication of Superconducting Tunnel Junctions and Phononic Crystal Structures
Julkaistu sarjassa
JYU dissertationsTekijät
Päivämäärä
2021Tekijänoikeudet
© The Author & University of Jyväskylä
Phononic crystals (PnC) are periodic structures analogous to the more common photonic crystals. Instead of a periodic dielectric constant they have a periodic elasticity and density, and thus they alter the flow of vibrational energy (heat and/or sound) through a material. This thesis focuses on the fabrication of three-dimensional (3D) PnC structures, integration of tunnel junction devices with them and studying their thermal properties. The 3D PnC structures, which in this case are 3D square lattices of spheres, were fabricated with 3D lithography using established methods. However, getting the exact wanted geometry required a lot of work and thus part of the thesis revolves around the optimization of the design. Then we had to develop a method for the fabrication of measurement electronics on these 3D structures as no conventional methods really allow such fabrication. Next we wanted to prove that the developed method can produce the necessary measurement devices. In this case the devices are superconductor-insulator-normalmetal-insulator-superconductor (SINIS) junction pairs. We show that the method can produce good quality SINIS junctions, both on a flat substrate and on a 3D structure, using low-temperature measurements. The last part of the thesis focuses on the thermal conductance measurements of the fabricated PnC structures. These measurements were made for two different PnC structures with sphere diameters of 3.1 μm and 5.0 μm, and also for a control bulk structure with the same geometry. The results of these measurements are compared to finite element method simulations made with a ballistic model. Keywords: Phononic crystal, 3D lithography, thermal conductance, low temperature
...
![showless](/themes/JYX2//images/showless.png)
![showmore](/themes/JYX2//images/showmore.png)
Julkaisija
Jyväskylän yliopistoISBN
978-951-39-8696-4ISSN Hae Julkaisufoorumista
2489-9003Julkaisuun sisältyy osajulkaisuja
- Artikkeli I: Heiskanen, S., Geng, Z., Mastomäki, J., & Maasilta, I. J. (2020). Nanofabrication on 2D and 3D Topography via Positive‐Tone Direct‐Write Laser Lithography. Advanced Engineering Materials, 22(2), Article 1901290. DOI: 10.1002/adem.201901290. JYX: jyx.jyu.fi/handle/123456789/68006
- Artikkeli II: Heiskanen, S., & Maasilta, I. J. (2020). Superconducting tunnel junction fabrication on three-dimensional topography based on direct laser writing. Applied Physics Letters, 117(23), Article 232601. DOI: 10.1063/5.0029273. JYX: jyx.jyu.fi/handle/123456789/73252
- Artikkeli III: Heiskanen, S., Puurtinen, T. & Maasilta, I.J. Controlling thermal conductance using three-dimensional phononic crystals. Submitted manuscript.
- Artikkeli IV: Tian, Y., Isotalo, T., Konttinen, M. P., Li, J., Heiskanen, S., Geng, Z., & Maasilta, I. (2017). Intregrating metallic wiring with three-dimensional polystyrene colloidal crystals using electron-beam lithography and three-dimensional laser lithography. Journal of Physics D: Applied Physics, 50(5), Article 055302. DOI: 10.1088/1361-6463/aa5004. JYX: jyx.jyu.fi/handle/123456789/55714
Metadata
Näytä kaikki kuvailutiedotKokoelmat
- JYU Dissertations [806]
- Väitöskirjat [3499]
Lisenssi
Samankaltainen aineisto
Näytetään aineistoja, joilla on samankaltainen nimeke tai asiasanat.
-
Superconducting tunnel junction fabrication on three-dimensional topography based on direct laser writing
Heiskanen, Samuli; Maasilta, Ilari J. (American Institute of Physics, 2020)Superconducting junctions are widely used in a multitude of applications ranging from quantum information science and sensing to solidstate cooling. Traditionally, such devices must be fabricated on flat substrates using ... -
Fabrication, electrical characterization and 1/f noise study of submicron-sized superconducting tunnel junctions
Julin, Juhani (University of Jyväskylä, 2016) -
Fabrication of engineered tunneling junctions to individual carbon nanotubes
Juutilainen, Antti (2011) -
Tunnel junction thermometry on three-dimensional phononic crystals
Kirjanen, Emmi (2018)Tässä työssä on tutkittu kolmiulotteisia periodisia nanorakenteita, tarkemmin sanottuna fononikiteitä. Fononikiteet voivat muokata kiteessä liikkuvia värähtelyitä, eli ääntä ja lämpöä, samaan tapaan kuin fotonikiteet ... -
Graphene phononic crystals fabricated with electron-beam lithography
Lankinen, Aaro (2021)Koska grafeeni on aito kaksiulotteinen materiaali, sen avulla voidaan tutkia käytännössä teorioiden ennustamaa käyttäytymistä sellaisissa järjestelmissä. Yksi erityisen kiinnostava ilmiö on lämmönjohtavuuden lasku kun ...
Ellei toisin mainittu, julkisesti saatavilla olevia JYX-metatietoja (poislukien tiivistelmät) saa vapaasti uudelleenkäyttää CC0-lisenssillä.