A study of solar thermal absorber stack based on CrAlSiNx/CrAlSiNxOy structure by ion beams
AL-Rjoub, A., Costa, P., Rebouta, L., Radović, I. B., Arstila, K., Barradas, N., Alves, E., Matilainen, A., & Pischow, K. (2019). A study of solar thermal absorber stack based on CrAlSiNx/CrAlSiNxOy structure by ion beams. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 450, 195-199. https://doi.org/10.1016/j.nimb.2018.04.024
Published inNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
DisciplineFysiikkaYdin- ja kiihdytinfysiikan huippuyksikköPhysicsCentre of Excellence in Nuclear and Accelerator Based Physics
© 2019 Elsevier BV
Renewable energies are foreseen as a major energy resource for next generations. Among several energy sources and technologies available, Concentrated Solar Power (CSP) technology has a great potential, but it needs to be optimised, in particular to reduce the costs, with an increase of the operating temperature and long term stability. This goal can be achieved by tailoring the composition and multilayer structure of films. In this work we present and discuss the results obtained from solar absorber coatings based on nitride/oxynitride structures. A four-layer film structure, W/CrAlSiNx(HA)/CrAlSiNxOy(LA)/SiAlOx, was deposited on stainless steel substrates using magnetron sputtering deposition method. Simulations were performed to establish the best spectral properties of the multilayer stacks with optical constants of single layers and film thickness. The elemental analysis was performed using Rutherford Backscattering Spectrometry (RBS) and Time of flight Elastic Recoil Detection Analysis (TOF-ERDA). To assess the thermal stability of the coatings the samples were thermal annealed at 400 °C, in air, and at 600 °C, in vacuum. The results obtained by RBS and TOF-ERDA reveal good oxidation resistance and thermal stability. Also, the optical measurements confirm the potential of these materials for the use in CSP technology. ...
Publication in research information system
MetadataShow full item record
Showing items with similar title or keywords.
Laitinen Mikko (University of Jyväskylä, 2013)
Julin, Jaakko (University of Jyväskylä, 2016)Time-of-ﬂight elastic recoil detection is an ion beam based method to analyze the elemental composition of thin ﬁlm samples at different depths. In order to improve the mass resolution and to enable kinematic correction ...
Julin, Jaakko; Sajavaara, Timo (Elsevier BV, 2016)A versatile system to capture and analyze signals from multi channel plate (MCP) based time-of-flight detectors and ionization based energy detectors such as silicon diodes and gas ionization chambers (GIC) is introduced. ...
Laitinen, Mikko; Rossi, Mikko; Julin, Jaakko; Sajavaara, Timo (Elsevier BV, 2014)A new time-of-flight elastic recoil detection spectrometer has been built, and initially the main effort was focused in getting good timing resolution and high detection efficiency for light elements. With the ready system, ...
Surprising solvent-induced structural rearrangements in large [N⋯I+⋯N] halogen-bonded supramolecular capsules : an ion mobility-mass spectrometry study Warzok, Ulrike; Marianski, Mateusz; Hoffmann, Waldemar; Turunen, Lotta; Rissanen, Kari; Pagel, Kevin; Schalley, Christoph A. (Royal Society of Chemistry, 2018)Coordinative halogen bonds have recently gained interest for the assembly of supramolecular capsules. Ion mobility-mass spectrometry and theoretical calculations now reveal the well-defined gas-phase structures of dimeric ...