Show simple item record

dc.contributor.authorTuovinen, Tero
dc.contributor.authorLeppänen, Teemu
dc.contributor.authorErkkilä, Anna-Leena
dc.contributor.authorPeriaux, Jacques
dc.date.accessioned2019-06-17T10:28:28Z
dc.date.available2019-06-17T10:28:28Z
dc.date.issued2019
dc.identifier.citationTuovinen, T., Leppänen, T., Erkkilä, A.-L., & Periaux, J. Design challenges and opportunities of 3D printing. <i>ECCOMAS Newsletter</i>, . <a href="http://www.eccomas.org/spacehome/1/22" target="_blank">http://www.eccomas.org/spacehome/1/22</a>
dc.identifier.otherCONVID_31218869
dc.identifier.otherTUTKAID_81686
dc.identifier.urihttps://jyx.jyu.fi/handle/123456789/64664
dc.description.abstractIn the future, the number and complexity of products made using additive manufacturing (AM) techniques will increase rapidly. The development of softwares and algorithms related to processes will eliminate extra intermediate steps between the product design and the end product, and will finally give us more intelligent way to manufacture these new products. More efficient 3D printing processes will enable the production of cheaper individual items and, furthermore, they will increase the demand for these high - quality tailored unrivalled solutions. The market potential is huge. However, at present the fundamentals of the area are only lightly studied and several key challenges concerning structural behavior and performance have to be solved before these techniques can be used in a widespread, cost - effective manner. Success in this task creates a basis for mathematical modeling and design, which will considerably accelerate the development time cycle of consumer products. With new computational methods becoming even more sophisticated and faster, the repeatability and reliability of the product design process will improve, enabling further production quality advances in the manufacturing industry. 3D printing assisted by Artificial Intelligence (AI) will become one of the major components of concept of ’Industry 4.0’ approaching independently operating and even self - contained systems.fi
dc.format.mimetypeapplication/pdf
dc.language.isoeng
dc.publisherEuropean Community on Computational Methods in Applied Sciences ECCOMAS
dc.relation.ispartofseriesECCOMAS Newsletter
dc.relation.urihttp://www.eccomas.org/spacehome/1/22
dc.rightsIn Copyright
dc.subject.other3D-tulostusfi
dc.subject.othertuotekehitysfi
dc.subject.other3D printingfi
dc.subject.otherproduct developmentfi
dc.titleDesign challenges and opportunities of 3D printing
dc.typecontributionToPeriodical
dc.identifier.urnURN:NBN:fi:jyu-201906173249
dc.contributor.laitosInformaatioteknologian tiedekuntafi
dc.contributor.laitosFaculty of Information Technologyen
dc.contributor.oppiaineTietotekniikkafi
dc.contributor.oppiaineMathematical Information Technologyen
dc.type.urihttp://purl.org/eprint/type/JournalArticle
dc.date.updated2019-06-17T09:15:17Z
dc.description.reviewstatusnonPeerReviewed
dc.format.pagerange8-14
dc.relation.volume2019
dc.type.versionpublishedVersion
dc.rights.copyright© 2019 the Authors
dc.rights.accesslevelopenAccessfi
dc.subject.yso3D-tulostus
dc.subject.ysotuotekehitys
dc.format.contentfulltext
jyx.subject.urihttp://www.yso.fi/onto/yso/p27475
jyx.subject.urihttp://www.yso.fi/onto/yso/p2721
dc.rights.urlhttp://rightsstatements.org/page/InC/1.0/?language=en


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

In Copyright
Except where otherwise noted, this item's license is described as In Copyright