A neutron source for IGISOL-JYFLTRAP : Design and characterisation
Mattera, A., Pomp, S., Lantz, M., Rakopoulos, V., Solders, A., Al-Adili, A., Passoth, E., Prokofiev, A. V., Andersson, P., Hjalmarsson, A., Bedogni, R., Bortot, D., Esposito, A., Gentile, A., Gómez-Ros, J. M., Introini, M. V., Pola, A., Gorelov, D., Penttilä, H., . . . Eronen, T. (2017). A neutron source for IGISOL-JYFLTRAP : Design and characterisation. The European Physical Journal A, 53(8), Article 173. https://doi.org/10.1140/epja/i2017-12362-x
Published in
The European Physical Journal ADate
2017Copyright
© The Author(s) 2017. This is an open access article published by Springer, distributed under a Creative Commons Attribution license.
A white neutron source based on the Be(p, nx) reaction for fission studies at the IGISOL-JYFLTRAP facility has been designed and tested. 30MeV protons impinge on a 5mm thick water-cooled beryllium disc. The source was designed to produce at least 1012 fast neutrons/s on a secondary fission target, in order to reach competitive production rates of fission products far from the valley of stability. The Monte Carlo codes MCNPX and FLUKA were used in the design phase to simulate the neutron energy spectra. Two experiments to characterise the neutron field were performed: the first was carried out at The Svedberg Laboratory in Uppsala (SE), using an Extended-Range Bonner Sphere Spectrometer and a liquid scintillator which used the time-of-flight (TOF) method to determine the energy of the neutrons; the second employed Thin-Film Breakdown Counters for the measurement of the TOF, and activation foils, at the IGISOL facility in Jyväskylä (FI). Design considerations and the results of the two
...
Publisher
Springer Berlin HeidelbergISSN Search the Publication Forum
1434-6001Keywords
Publication in research information system
https://converis.jyu.fi/converis/portal/detail/Publication/27197808
Metadata
Show full item recordCollections
License
Except where otherwise noted, this item's license is described as © The Author(s) 2017. This is an open access article published by Springer, distributed under a Creative Commons Attribution license.