Recent experiments on photo-assisted negative ion production in caesium sputter ion source at the JYFL Pelletron facility

Abstract

We have measured the effect of a 15 W, 445 nm laser on Br- beam current produced by a SNICS ion source by systematically varying the ion source parameters, most importantly the target holder material, and temperatures of the ioniser and Cs oven. The target holder material has no significant effect on the observed photoenhancement of the beam current. The evidence shows that the laser allows reaching higher beam currents at low ioniser temperatures compared to running the source without the laser but at higher ioniser temperature. We have observed a priming effect, i.e. applying a number of laser pulses at certain ion source settings causes the beam current measured without the laser to increase significantly and remain high after ceasing the laser pulsing. These observations suggest that the photo-assisted effect is related to changes of the cathode caesium coverage. Finally, we report the results of our first attempts to sustain a stable beam current at the elevated level over several hours, achieved through active control of the laser power.