Näytä suppeat kuvailutiedot

dc.contributor.authorFrimodig, Janne
dc.contributor.authorHaukka, Matti
dc.date.accessioned2023-11-22T10:19:05Z
dc.date.available2023-11-22T10:19:05Z
dc.date.issued2023
dc.identifier.citationFrimodig, J., & Haukka, M. (2023). Removal of estrogens from aqueous solutions using 3D-printed polymers. <i>Environmental Science : Advances</i>, <i>2</i>(12), 1739-1745. <a href="https://doi.org/10.1039/D3VA00159H" target="_blank">https://doi.org/10.1039/D3VA00159H</a>
dc.identifier.otherCONVID_194516652
dc.identifier.urihttps://jyx.jyu.fi/handle/123456789/92010
dc.description.abstractDifferent pharmaceuticals and endocrine-disrupting chemicals (EDCs) can negatively impact our environment, even at nanogram per liter levels. At the same time, the amount of micro- and nanoplastics from various sources, such as personal care products, wastewater sludge, vehicle tire wear, etc., are increasing in the environment. Polymers may also serve as a source for EDCs and other contaminants via the decomposition of polymers or metabolic processes. However, they may serve as sorbents for pollutants as well. In this work, estrogen group hormones were shown to bind into 3D-printed filters made from commonly used polymers, such as polyamide-12 (PA), thermoplastic polyurethane (TPU), polypropylene (PP), and polystyrene (PS). The adsorption tests showed that polymers containing a higher degree of functional groups (PA and TPU) were more efficient adsorbents than structurally simpler polymers (PP and PS). Kinetic models for polyamide flow-through filters were measured for estrone, 17β-estradiol, and 17α-ethinylestradiol. The filters printed with the powder-bed fusion 3D printing technique successfully removed estrogen group hormones from water. The 3D printing technique provided a versatile tool for preparing filters with optimized porosities and flow-through properties.en
dc.format.mimetypeapplication/pdf
dc.language.isoeng
dc.publisherRoyal Society of Chemistry
dc.relation.ispartofseriesEnvironmental Science : Advances
dc.rightsCC BY 3.0
dc.titleRemoval of estrogens from aqueous solutions using 3D-printed polymers
dc.typearticle
dc.identifier.urnURN:NBN:fi:jyu-202311228027
dc.contributor.laitosKemian laitosfi
dc.contributor.laitosDepartment of Chemistryen
dc.contributor.oppiaineEpäorgaaninen ja analyyttinen kemiafi
dc.contributor.oppiaineEpäorgaaninen kemiafi
dc.contributor.oppiaineInorganic and Analytical Chemistryen
dc.contributor.oppiaineInorganic Chemistryen
dc.type.urihttp://purl.org/eprint/type/JournalArticle
dc.type.coarhttp://purl.org/coar/resource_type/c_2df8fbb1
dc.description.reviewstatuspeerReviewed
dc.format.pagerange1739-1745
dc.relation.issn2754-7000
dc.relation.numberinseries12
dc.relation.volume2
dc.type.versionpublishedVersion
dc.rights.copyright© 2023 The Author(s). Published by the Royal Society of Chemistry
dc.rights.accesslevelopenAccessfi
dc.relation.grantnumber101069513
dc.subject.ysopolymeerit
dc.subject.ysohormonihäiritsijät
dc.subject.ysoestrogeenit
dc.subject.yso3D-tulostimet
dc.subject.ysolääkkeet
dc.subject.ysoadsorptio
dc.subject.ysohormonit
dc.subject.ysomuovi
dc.subject.ysokemikaalit
dc.subject.ysopolyuretaani
dc.subject.ysopolyamidi
dc.format.contentfulltext
jyx.subject.urihttp://www.yso.fi/onto/yso/p926
jyx.subject.urihttp://www.yso.fi/onto/yso/p28901
jyx.subject.urihttp://www.yso.fi/onto/yso/p16792
jyx.subject.urihttp://www.yso.fi/onto/yso/p37917
jyx.subject.urihttp://www.yso.fi/onto/yso/p1077
jyx.subject.urihttp://www.yso.fi/onto/yso/p13395
jyx.subject.urihttp://www.yso.fi/onto/yso/p2589
jyx.subject.urihttp://www.yso.fi/onto/yso/p924
jyx.subject.urihttp://www.yso.fi/onto/yso/p7757
jyx.subject.urihttp://www.yso.fi/onto/yso/p16689
jyx.subject.urihttp://www.yso.fi/onto/yso/p13196
dc.rights.urlhttps://creativecommons.org/licenses/by/3.0/
dc.relation.doi10.1039/D3VA00159H
dc.relation.funderEuropean Commissionen
dc.relation.funderEuroopan komissiofi
jyx.fundingprogramLIFEen
jyx.fundingprogramLIFEfi
jyx.fundinginformationThe research was funded by LIFE21-IPE-FI-PlastLIFE/101069513. The PlastLIFE project is co-funded by the European Union. Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them.
dc.type.okmA1


Aineistoon kuuluvat tiedostot

Thumbnail

Aineisto kuuluu seuraaviin kokoelmiin

Näytä suppeat kuvailutiedot

CC BY 3.0
Ellei muuten mainita, aineiston lisenssi on CC BY 3.0