Conjugation with carbon nanotubes improves the performance of mesoporous silicon as Li-ion battery anode
Ikonen, T., Kalidas, N., Lahtinen, K., Isoniemi, T., Toppari, J. J., Vázquez, E., Herrero-Chamorro, M. A., Fierro, J. L. G., Kallio, T., & Lehto, V.-P. (2020). Conjugation with carbon nanotubes improves the performance of mesoporous silicon as Li-ion battery anode. Scientific Reports, 10, Article 5589. https://doi.org/10.1038/s41598-020-62564-0
Julkaistu sarjassa
Scientific ReportsTekijät
Päivämäärä
2020Tekijänoikeudet
© 2020 The Author(s)
Carbon nanotubes can be utilized in several ways to enhance the performance of silicon-based anodes. In the present work, thermally carbonized mesoporous silicon (TCPSi) microparticles and single-walled carbon nanotubes (CNTs) are conjugated to create a hybrid material that performs as the Li-ion battery anode better than the physical mixture of TCPSi and CNTs. It is found out that the way the conjugation is done has an essential role in the performance of the anode. The conjugation should be made between negatively charged TCPSi and positively charged CNTs. Based on the electrochemical experiments it is concluded that the positive charges, i.e., excess amine groups of the hybrid material interfere with the diffusion of the lithium cations and thus they should be removed from the anode. Through the saturation of the excess positive amine groups on the CNTs with succinic anhydride, the performance of the hybrid material is even further enhanced.
Julkaisija
Nature Publishing GroupISSN Hae Julkaisufoorumista
2045-2322Asiasanat
Julkaisu tutkimustietojärjestelmässä
https://converis.jyu.fi/converis/portal/detail/Publication/35134395
Metadata
Näytä kaikki kuvailutiedotKokoelmat
Rahoittaja(t)
Suomen AkatemiaRahoitusohjelmat(t)
Akatemiaohjelma, SALisätietoja rahoituksesta
The authors acknowledge the financial support from the Academy of Finland (decision number 288531 and 283011) and Fortum Foundation. The authors also thank SIB Labs, University of Eastern Finland for providing laboratory facilities and Okmetic Ltd for providing silicon wafers.Lisenssi
Samankaltainen aineisto
Näytetään aineistoja, joilla on samankaltainen nimeke tai asiasanat.
-
Considering lithium-ion battery 3D-printing via thermoplastic material extrusion and polymer powder bed fusion
Maurel, Alexis; Haukka, Matti; MacDonald, Eric; Kivijärvi, Lauri; Lahtinen, Elmeri; Kim, Hyeonseok; Armand, Michel; Cayla, Aurélie; Jamali, Arash; Grugeon, Sylvie; Dupont, Loic; Panier, Stéphane (Elsevier BV, 2021)In this paper, the ability to 3D print lithium-ion batteries through thermoplastic material extrusion and polymer powder bed fusion is considered. Focused on the formulation of positive electrodes composed of polypropylene, ... -
Effects of Lithium Source and Content on the Properties of Li-Rich Layered Oxide Cathode Materials
Wang, Yufan; Hietaniemi, Marianna; Välikangas, Juho; Hu, Tao; Tynjälä, Pekka; Lassi, Ulla (MDPI, 2023)Lithium-rich layered oxide (LLO) are considered high-capacity cathode materials for next-generation lithium-ion batteries. In this study, LLO cathode materials were synthesized via the hydroxide coprecipitation method ... -
Sustainable Biomass-Derived Carbon Electrodes for Potassium and Aluminum Batteries : Conceptualizing the Key Parameters for Improved Performance
Simões Dos Reis, Glaydson; Petnikota, Shaikshavali; Subramaniyam, Chandrasekar M.; Pequeno de Oliveira, Helinando; Larsson, Sylvia; Thyrel, Mikael; Lassi, Ulla; García Alvarado, Flaviano (MDPI AG, 2023)The development of sustainable, safe, low-cost, high energy and density power-density energy storage devices is most needed to electrify our modern needs to reach a carbon-neutral society by ~2050. Batteries are the backbones ... -
Biomass-derived carbon–silicon composites (C@Si) as anodes for lithium-ion and sodium-ion batteries : A promising strategy towards long-term cycling stability : A mini review
Simoes dos Reis, Glaydson; Molaiyan, Palanivel; Subramaniyam, Chandrasekar M.; García-Alvarado, Flaviano; Paolella, Andrea; Pequeno de Oliveira, Helinando; Lassi, Ulla (Elsevier BV, 2023)The global need for high energy density and performing rechargeable batteries has led to the development of high-capacity silicon-based anode materials to meet the energy demands imposed to electrify plug-in vehicles to ... -
Precipitation and Calcination of High-Capacity LiNiO2 Cathode Material for Lithium-Ion Batteries
Välikangas, Juho; Laine, Petteri; Hietaniemi, Marianne; Hu,Tao; Tynjälä, Pekka; Lassi, Ulla (MDPI, 2020)This article presents the electrochemical results that can be achieved for pure LiNiO2 cathode material prepared with a simple, low-cost, and efficient process. The results clarify the roles of the process parameters, ...
Ellei toisin mainittu, julkisesti saatavilla olevia JYX-metatietoja (poislukien tiivistelmät) saa vapaasti uudelleenkäyttää CC0-lisenssillä.