The IGISOL cooler and Trap Control System
Tekijät
Päivämäärä
2003Pääsyrajoitukset
Aineistoon pääsyä on rajoitettu tekijänoikeussyistä. Aineisto on luettavissa Jyväskylän yliopiston kirjaston arkistotyöasemalta. Ks. https://kirjasto.jyu.fi/kokoelmat/arkistotyoasema.
Tekijänoikeudet
Julkaisu on tekijänoikeussäännösten alainen. Teosta voi lukea ja tulostaa henkilökohtaista käyttöä varten Käyttö kaupallisiin tarkoituksiin on kielletty.
Samankaltainen aineisto
Näytetään aineistoja, joilla on samankaltainen nimeke tai asiasanat.
-
Yield measurements at IGISOL with a digital data acquisition system
Khanam, Afrina (2017)A new digital data acquisition system has been installed at the IGISOL facility at the department of Physics in University of Jyväskylä in November, 2016. The technical details of the hardware and software of this new ... -
Weakly controlled Moran constructions and iterated functions systems in metric spaces
Rajala, Tapio; Vilppolainen, Markku (University of Illinois, 2011)We study the Hausdorff measures of limit sets of weakly controlled Moran constructions in metric spaces. The separation of the construction pieces is closely related to the Hausdorff measure of the corresponding limit set. ... -
Core muscle activity in OLKI Control exercise system and in three conventional abdominal exercises : a pilot study
Pasanen, Tero (2015)Johdanto. Syvien keskivartalon lihasten aktivoinnin tehostamiseksi on kehitetty uusi, OLKI Control, harjoittelulaite. Tämän pilottitutkimuksen tarkoituksena oli kuvailla lihasaktivaatiota OLKI Control -laitteella tehdyn ... -
Mitigating the amount of overhead arising from the control signaling of the IEEE 802.16 OFDMa system
Tykhomyrov, Vitaliy (2011)This work focuses on mitigating the amount of overhead arising from the control signaling of the IEEE 802.16 system. It analyses existent solutions and proposes efficient methods and algorithms. Although existent IEEE ... -
Near infra-red measurement based control system for thermo-mechanical refiners
Saarinen, Kari (2001)Pulp quality and energy economics are the key issues in any thermomechanical pulping (TMP) plant. The control in TMP plants is affected by two different types of disturbances: the slow wearing of refiner plates and the ...
Ellei toisin mainittu, julkisesti saatavilla olevia JYX-metatietoja (poislukien tiivistelmät) saa vapaasti uudelleenkäyttää CC0-lisenssillä.