Integroiva projekti. Mittalaitteen kalibrointi
Date
1980Access restrictions
This material has a restricted access due to copyright reasons. It can be read at the workstation at Jyväskylä University Library reserved for the use of archival materials: https://kirjasto.jyu.fi/collections/archival-workstation.
Copyright
This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Related items
Showing items with similar title or keywords.
-
Kalibrointimittauslaitteiston suunnittelu ja valmistus värähtelyanturille
Miettinen, Tuukka (2009) -
Calibration of the muon barrel chambers for the EMMA experiment
Sorjonen, Jukka (2017)The topic of this thesis was position calibration of muon barrel chambers used in the EMMA experiment. A detector ergo plank consist of seven chambers, and there were six uncalibrated detectors. The planks were set in a ... -
A Multi-Position Calibration Method for Consumer-Grade Accelerometers, Gyroscopes, and Magnetometers to Field Conditions
Särkkä, Olli; Nieminen, Tuukka; Suuriniemi, Saku; Kettunen, Lauri (Institute of Electrical and Electronics Engineers, 2017)This paper presents a calibration method for consumer-grade accelerometers, gyroscopes, and magnetometers. Considering the calibration of consumer-grade sensors, it is essential that no specialized equipment is required ... -
Autonomous hyperspectral UAS photogrammetry for environmental monitoring applications
Honkavaara, E.; Hakala, T.; Markelin, L.; Jaakkola, A.; Saari, H.; Ojanen, H.; Pölönen, Ilkka; Tuominen, S.; Näsi, R.; Rosnell, T.; Viljanen, N. (International Society for Photogrammetry and Remote Sensing (ISPRS), 2014)The unmanned airborne system (UAS) remote sensing using lightweight multi- and hyperspectral imaging sensors offer new possibilities for the environmental monitoring applications. Based on the accurate measurements of the ...