Kinematic and kinetic characteristics of treadmill roller skiing and validation of force measurement roller skis
Effective skiing biomechanics has been identified as one of the most important elements that could enhance performance in cross-country skiing. This study aimed to describe the biomechanical characteristics in treadmill roller skiing by simultaneously measuring the 2D forces from skis, the force from poles, and the kinematic data. The force acting on skiers’ COM in the forward direction is the forward propulsion, and several approaches can be used to calculate it. These approaches were compared to discover the most suitable one (Article I). We mainly concentrated on the V2 skating technique, in which both skis and poles are used for forward propulsion. The biomechanical characteristics of this technique were investigated at different inclines (Article II) and speeds. The contributions from the skis and poles were also investigated while changing the treadmill speed using the point of view of external power (Article III). Finally, a new force measurement roller ski was validated for future studies (Article IV). Fourteen experienced skiers familiar with treadmill roller skiing participated in this study. Custom-made force measurement bindings, pole force sensors, and an eight-camera Vicon system were used to collect the force data and the trajectories of reflective markers (Article I–III). A pair of newly designed 2D force measurement roller ski, AMTI 3D force plates, and Vicon system were used as well (Article IV). The approach of calculating the forward component of GRF was found to be appropriate for quantifying the forward propulsion on a skier’s COM (Article I). The cycle characteristics of the V2 skating technique were found to be affected by the treadmill incline (Article II) and the speed. From the propulsive force point of view, increasing both pole and ski force effectiveness was found to be needed at steeper grades, but the relative contribution of pole forces versus ski forces in overcoming the total resistance did not change with incline (Article II). While the treadmill speed was changed, the poles contributed more propulsive force and were more effective than skis in the skiing direction, and the contribution of legs slightly increased when the speed was increased. From the external power point of view, the relative contribution from the poles towards the total external power was smaller than when analyzed in the force domain (Article III) and was not affected by the increasing speed. Finally, the newly designed 2D force measurement roller ski was found to be valid for use in future research (Article IV).
...
Tehokas hiihdon biomekaniikka on tunnistettu yhdeksi tärkeimmistä tekijöistä, jotka voivat parantaa suorituskykyä murtomaahiihdossa. Tämän tutkimuksen tavoitteena oli kuvata juoksumattorullahiihdon biomekaanisia ominaisuuksia mittaamalla samanaikaisesti suksien 2D-voimat, sauvojen voimat ja kinemaattiset tiedot. Hiihtäjän massakeskipisteen eteenpäin vaikuttava voima on propulsio, ja sen laskemiseen voidaan käyttää useita lähestymistapoja. Näitä lähestymistapoja verrattiin sopivimman löytämiseksi (Artikkeli I). Tutkimuksessa keskityttiin pääasiassa V2-luistelutekniikkaan, jossa sekä suksia että sauvoja käytetään eteenpäin viemänä voimana. Tämän tekniikan biomekaanisia ominaisuuksia tutkittiin eri nousukulmilla (Artikkeli II) ja nopeuksilla. Myös suksien ja sauvojen suhteellista kontribuutiota tutkittiin muutettaessa juoksumaton nopeutta ulkoisen tehon näkökulmasta (Artikkeli III). Lopuksi uusi voimanmittausrullasuksi validoitiin tulevia tutkimuksia varten (Artikkeli IV). Tutkimukseen osallistui neljätoista kokenutta juoksumattorullahiihtoon perehtynyttä hiihtäjää. Räätälöityjä suksivoima- ja sauvavoima-antureita ja kahdeksan kameran Vicon-järjestelmää käytettiin voimatietojen ja heijastavien markkereiden liikeratojen keräämiseen (Artikkeli I-III). Lisäksi käytettiin äskettäin suunniteltuja 2D-voimanmittausrullasuksia, AMTI 3D -voimalevyjä ja Vicon-järjestelmää (Artikkeli IV). Eteenpäin suuntautuvan reaktiovoiman laskentatapa todettiin sopivaksi laskettaessa hiihtäjän massakeskipisteeseen vaikuttavaa eteenpäin vievää voimaa (Artikkeli I). V2-luistelutekniikan syklin ominaisuuksiin havaittiin vaikuttavan juoksumaton kaltevuus (Artikkeli II) ja nopeus. Propulsiovoiman näkökulmasta sekä sauvojen että hiihtovoiman tehokkuuden lisäämistä havaittiin jyrkemmillä nousukulmilla, mutta sauvavoimien suhteellinen osuus kokonaisvastuksen voittamiseksi ei muuttunut kaltevuuden myötä (Artikkeli II). Samalla kun juoksumaton nopeutta nostettiin, sauvat vaikuttivat enemmän propulsiovoimaan ja olivat tehokkaampia kuin sukset. Jalkojen suhteellinen osuus tosin kasvoi hieman, kun nopeutta nostettiin. Ulkoisen tehon näkökulmasta sauvojen suhteellinen panos ulkoiseen kokonaistehoon oli pienempi kuin pelkillä voima-arvoilla analysoituna (Artikkeli III), eikä lisääntyvä nopeus vaikuttanut siihen. Uusi 2D-voimanmittausrullasuksi havaittiin kelpaavan käytettäväksi tulevissa tutkimuksissa (Artikkeli IV).
...
Publisher
Jyväskylän yliopistoISBN
978-951-39-9744-1ISSN Search the Publication Forum
2489-9003Contains publications
- Artikkeli I: Zhao, S., Ohtonen, O., Ruotsalainen, K., Kettunen, L., Lindinger, S., Göpfert, C., & Linnamo, V. (2022). Propulsion Calculated by Force and Displacement of Center of Mass in Treadmill Cross-Country Skiing. Sensors, 22(7), Article 2777. DOI: 10.3390/s22072777
- Artikkeli II: Zhao, S., Lindinger, S., Ohtonen, O., & Linnamo, V. (2023). Contribution and effectiveness of ski and pole forces in selected roller skiing techniques on treadmill at moderate inclines. Frontiers in Sports and Active Living, 5, Article 948919. DOI: 10.3389/fspor.2023.948919
- Artikkeli III Zhao, S., Ohtonen, O., Linnamo, V., Ruotsalainen, K., Göpfert, C., Kettunen, L., Lindinger, S. The roles and contributions of skis and poles during treadmill V2 skiing technique at different speeds. Submitted.
- Artikkeli IV: Zhao, S., Linnamo, V., Ruotsalainen, K., Lindinger, S., Kananen, T., Koponen, P., & Ohtonen, O. (2022). Validation of 2D Force Measurement Roller Ski and Practical Application. Sensors, 22(24), Article 9856. DOI: 10.3390/s22249856
Metadata
Show full item recordCollections
- JYU Dissertations [836]
- Väitöskirjat [3546]
License
Related items
Showing items with similar title or keywords.
-
Contribution and effectiveness of ski and pole forces in selected roller skiing techniques on treadmill at moderate inclines
Zhao, Shuang; Lindinger, Stefan; Ohtonen, Olli; Linnamo, Vesa (Frontiers Media SA, 2023)Background: Most of the studies about the effects of incline on cross-country skiing are related to the metabolic efficiency. The effective skiing biomechanics has also been indicated to be among the key factors that may ... -
Validation of 2D Force Measurement Roller Ski and Practical Application
Zhao, Shuang; Linnamo, Vesa; Ruotsalainen, Keijo; Lindinger, Stefan; Kananen, Timo; Koponen, Petri; Ohtonen, Olli (MDPI, 2022)Several methods could be used to measure the forces from skis or roller skis in cross-country skiing. Equipment that could measure medio-lateral forces may be of good help for investigating the relevant skating techniques. ... -
Liikkeen kinemaattisista ominaispiirteistä, niiden psykofyysisistä selitysyhteyksistä ja näiden muutoksista psykomotorisen kuormituksen ja kestävyysharjoittelun vaikutuksesta = On the kinematic characteristics and psychophysical correlates of a human movement and their changes during psychomotor loading and endurance conditioning
Kirjonen, Juhani; Rusko, Heikki; Sarviharju, Pekka J. (1971) -
Role of the interaction between lumbar kinematics and accelerometer-measured physical activity in bodily pain, physical functioning and work ability among health care workers with low back pain
Bayartai, Munkh-Erdene; Taulaniemi, Annika; Tokola, Kari; Vähä-Ypyä, Henri; Parkkari, Jari; Husu, Pauliina; Kankaanpää, Markku; Vasankari, Tommi; Bauer, Christoph Michael; Luomajoki, Hannu (Elsevier, 2023)The aim of this study was to examine the associations of spinal kinematics and physical activity (PA) with bodily pain, physical functioning, and work ability among health care workers with low back pain (LBP). Spinal ... -
Characteristics of segmented super clover detector in close geometry decay measurements
Rahkila, Panu; Grahn, Tuomas; Eskola, Kari; Gerl, J.; Greenlees, Paul; Jones, P.; Joss, D. T.; Julin, Rauno; Juutinen, Sakari; Kankaanpää, Harri; Keenan, A.; Kettunen, Heikki; Kojouharov, I.; Kuusiniemi, Pasi; Leino, Matti; Melarangi, A.; Moore, C. J.; Muikku, Maarit; Nieminen, Päivi; Page, R. D.; Scholey, C.; Uusitalo, Juha (Jagellonian University, 2001)Characteristics of the segmented Super Clover germanium detector response in close geometries have been studied. Results obtained with localising hit pattern recognition are compared with results from add-back and individual ...