The MIVOC method for the production of metal ion beams
A fundamentally new MIVOC method (Metal Ions from VOlatile Compounds) for the production of metal ion beams at the ECR ion sources has been developed. With the MIVOC technique it has been found possible to operate the JYFL-ECR ion source with compounds of metals, either powders or liquids, that have vapour pressure of the order of lE-3 mbar, or higher at room temperature. Up to present time, 17 beams have been produced with the MIVOC method (C, Mg, Si, Cl, Ti, V, Cr, Fe, Co, Ni, Ge, Mo, Ru, Sn, I, W and Os). In every day use it has turned out to be both simple and reliable. Due to this property, the MIVOC method has been adopted at several laboratories.
ISBN
978-951-39-9497-6Julkaisuun sisältyy osajulkaisuja
- Artikkeli I: Ärje, J., Koivisto, H. & Nurmia, M. (1993). Operation of the JYFL-ECR ion source. Proceedings of the 11th International Workshop on Electron Cyclotron Resonance Ion Sources, p. 27.
- Artikkeli II: Koivisto, H., Ärje, J., Nurmia, M. (1994). Metal ion beams from an ECR ion source using volatile compounds. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 94(3), 291-296. DOI: 10.1016/0168-583X(94)95368-6
- Artikkeli III: Ärje, J., Koivisto, H. & Nurmia, M. (1995). Status report of the JYFL-ECR ion source. Proceedings of the 12th International Workshop on ECR Ion Sources, p. 136.
- Artikkeli IV: Koivisto, H., Kolehmainen, E., Seppälä, R., Ärje, J., Nurmia, M. (1996). Production of a magnesium ion beam using the MIVOC method. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 117(1–2), 186-188. DOI: 10.1016/0168-583X(96)00238-8
- Artikkeli V: Koivisto, H., Hendolin, M., Ärje, J. (1997). New gas feeding system at the JYFL electron cyclotron resonance ion source. Review of Scientific Instruments, 68, 2707–2710. DOI: 10.1063/1.1148183
- Artikkeli VI: Koivisto, H., Harkewicz, R., Ärje, J., Nurmia, M. (1997). Metal ion beams at the JYFL-ECRIS. Proceedings of the 13th International Workshop on ECR Ion Sources. Submitted.
- Artikkeli VII: Koivisto, H., Ärje, J., Nurmia, M. (1998). Metal ions from the volatile compounds method for the production of metal ion beams. Review of Scientific Instruments, 69, 785–787. DOI: 10.1063/1.1148539
Metadata
Näytä kaikki kuvailutiedotKokoelmat
- Väitöskirjat [3430]
Samankaltainen aineisto
Näytetään aineistoja, joilla on samankaltainen nimeke tai asiasanat.
-
Engineering an experience : pre-production challenges in video game development
Paulaharju, Waltteri (2021)Tämä raportti on Jyväskylän yliopiston Informaatioteknologian laitoksen kandidaatintutkielma. Tutkielman aiheena on esituotantovaiheen ongelmat sekä kehitysmenetelmät videopeliteollisuudessa, ja tutkimus suoritettiin ... -
Production and investigation of neutron-rich Osmium isotopes with and around N=126 using gas flow transport method
Novikov, K.; Kozulin, E. M.; Harca, I. M.; Dmitriev, S.; Flueras, A.; Greenlees, Paul; Hanappe, F.; Khlebnikov, S. V.; Loktev, T.; Maurer, J.; Nitto, A. Di; Pakarinen, Janne; Ruotsalainen, Panu; Sandzelius, Mikael; Sorri, Juha; Sin, M.; Trzaska, Wladyslaw; Vardaci, E.; Zagrevaev, V. I. (Institute of Physics Publishing Ltd., 2014)Neutron-rich isotopes of heavy nuclei are until now poorly studied. In this work we investigate neutron-rich osmium isotopes produced in multi-nucleon transfer reactions. The reaction 136Xe+208Pb at energy near Coulomb ... -
Lean internal startups for software product innovation in large companies : Enablers and inhibitors
Edison, Henry; Smørsgård, Nina; Wang, Xiaofeng; Abrahamsson, Pekka (Elsevier Inc., 2018)Context: Startups are disrupting traditional markets and replacing well-established actors with their innovative products.To compete in this age of disruption, large and established companies cannot rely on traditional ... -
Lifetime measurements with the Doppler Shift Attenuation Method using a thick homogeneous production target - Verification of the method
Ertoprak, A.; Cederwall, B.; Jakobsson, U.; Nyako, B. M.; Nyberg, J.; Davies, P.; Doncel, M.; De France, G.; Kuti, I.; Napoli, D. R.; Wadsworth, R.; Chugre, S. S.; Raut, R.; Akkus, B.; Al-Azri, H.; Algora, A.; De Angelis, G.; Ata, A.; Bäck, T.; Boso, A.; Clement, E.; Debenham, D. M.; Dombradi, Zs.; Erturk, S.; Gadea, A.; Moradi, F. Ghazi; Gottardo, A.; Huyuk, T.; Ideguchi, E.; Jaworski, G.; Li, H.; Michelagnoli, C.; Modamio, V.; Palacz, M.; Petrache, C. M.; Recchia, F.; Sandzelius, Mikael; Siciliano, M.; Timar, J.; Valiente-Dobon, J. J.; Xiao, Z. G. (Jagellonian University, 2017)Doppler Shift Attenuation Method (DSAM) analysis of excited-state lifetimes normally employs thin production targets mounted on a thick stopper foil (“backing”) serving to slow down and stop the recoiling nuclei of ... -
Olley–Pakes productivity decomposition: computation and inference
Hyytinen, Ari; Ilmakunnas, Pekka; Maliranta, Mika (Wiley-Blackwell Publishing Ltd.; Royal Statistical Society, 2016)We show how a moment-based estimation procedure can be used to compute point estimates and standard errors for the two components of the widely used Olley–Pakes decomposition of aggregate (weighted average) productivity. ...
Ellei toisin mainittu, julkisesti saatavilla olevia JYX-metatietoja (poislukien tiivistelmät) saa vapaasti uudelleenkäyttää CC0-lisenssillä.