Dithionite bleaching of thermomechanical pulp — chemistry and optimal conditions
Julkaistu sarjassa
JYU dissertationsTekijät
Päivämäärä
2019Tekijänoikeudet
© The Author & University of Jyväskylä
The study described bleaching of thermomechanical pulp (TMP) mainly by a reductive bleaching agent, sodium dithionite. The theoretical part concentrated on the elucidation of lignin-preserving bleaching of mechanical pulps by introducing general concepts and reaction mechanisms. It also discussed novel analytical possibilities to determine sulphur-containing anions originated from dithionite.
The primary objective of the experimental part was to find out relevant factors affecting achievable brightness gain in the lignin-preserving bleaching of pressure groundwood (PGW). The bleachability and brightness stability were characterised by employing brightness measurements after the sodium dithionite treatment. Observations were further confirmed by filtrate analyses and total sulphur measurements of TMP.
Reaction pathways of dithionite bleaching were studied by analysing var-ious sulphur anions (bleach liquor and filtrates) and also the sulphur chemical-ly bound to fibres. The effects of bleaching factors were studied mainly by de-signing the experiments with the Taguchi method. The new information on re-actions of dithionite during the bleaching process further developed the postu-lated mechanism of lignin-preserving bleaching. The quantities of different sulphur constituents in filtrates and pulps after bleaching with respect to the added dithionite under laboratory-scale conditions could be presented. The efficiency of bleaching improved with an increase in temperature. Hence, tem-perature was the most important factor concerning the efficiency of dithionite bleaching, but it could not be extracted from other variables. The dosage and composition of dithionite grade were also significant factors and they should be optimised carefully for each mill-scale application with PGW.
...
Julkaisija
Jyväskylän yliopistoISBN
978-951-39-7768-9ISSN Hae Julkaisufoorumista
2489-9003Julkaisuun sisältyy osajulkaisuja
- Artikkeli I: Isoaho, J.P., Soininen, J. and Alén, R. (2019), Chemistry of Dithionite Bleaching. Part 1. Effect of Bleaching Variables. Submitted to APPITA.
- Artikkeli II: Isoaho, J.P., Soininen, J. and Alén, R. (2019). Chemistry of Dithionite Bleaching. Part 2. Comparable Study with Different Thermomechanical Pulps. Submitted to APPITA.
- Artikkeli III: Isoaho, J. P., Tarkkanen, S., Alén, R., & Fiskari, J. (2012). Oxidative degradation of AOX in softwood-based kraft mill effluents from ECF bleaching. Nordic Pulp & Paper Research Journal, 27 (4), 707-7013. DOI: 10.3183/NPPRJ-2012-27-04-p707-713
- Artikkeli IV: Isoaho, J. P., Alén, R., & Louhelainen, J. (2006). Total sulphur content of dithionite-bleached pulp. Cellulose Chemistry and Technology, 40 (9-10), 769-774.
- Artikkeli V: Louhelainen, J., Alén, R., & Isoaho, J. P. (2005). Determination of the total sulfur content in black liquor by X-ray fluorescence. Journal of Pulp and Paper Science, 31 (1), 57-61.
- Artikkeli VI: Malkavaara, P., Isoaho, J. P., Soininen, J., & Alén, R. (2000). Dithionite bleaching of thermomechanical pulp: factors having effects on bleaching efficiency. Journal of Chemometrics, 14 (5-6), 693-698.
Metadata
Näytä kaikki kuvailutiedotKokoelmat
- JYU Dissertations [806]
- Väitöskirjat [3498]
Lisenssi
Samankaltainen aineisto
Näytetään aineistoja, joilla on samankaltainen nimeke tai asiasanat.
-
In the shadow of coral bleaching
Zvuloni, Assaf; Rieder, Golan; Yosef-Omesi, Omri; Gdalia, Avi; Seeligman, Omri; Tufikian, Chen; Neder, Ziv; Habary, Assaf; Komet, Dror; Lindman, Yoav; Fine, Maoz (Open Science Centre, University of Jyväskylä, 2018)Coral reefs are highly susceptible to climate change, as evidenced by extensive mass bleaching events over the past decades. Until solutions to reduce greenhouse gas emissions are implemented, pro-active unconventional ... -
A comparative study of advanced oxidative processes : Degradation of chlorinated organic compounds in ultrafiltration fractions of kraft pulp bleaching effluent
Fiskari, Juha; Kakkonen, Annukka; Pakkanen, Hannu; Alén, Raimo (Wroclaw University of Technology, 2016)Oxidative pre-treatment methods such as the Fenton oxidation, ozonation, and photocatalytic treatment have been compared in reducing adsorbable organic halogens (AOX) and chlorophenolic compounds in untreated kraft pulp ... -
Synthesis, structure verification and gas chromatographic determination of chlorinated catechols and guaiacols occurring in speat bleach liquors of kraft pulp mills
Knuutinen, Juha (1984)Chlorination stage (C-stage) and extraction stage (Estage) spent bleach liquors (SBL) from a pine kraft pulp mill and the product from the chlorination of guaiacol (2-methoxyphenol) in aqueous solution were investigated ... -
Exploring the self-assembly of resorcinarenes : from molecular level interactions to mesoscopic structures
Helttunen, Kaisa (University of Jyväskylä, 2012) -
Definition of the pnictogen bond (IUPAC Recommendations 2023)
Resnati, Giuseppe; Bryce, David L.; Desiraju, Gautam R.; Frontera, Antonio; Krossing, Ingo; Legon, Anthony C.; Metrangolo, Pierangelo; Nicotra, Francesco; Rissanen, Kari; Scheiner, Steve; Terraneo, Giancarlo (De Gruyter, 2024)This recommendation proposes a definition for the term “pnictogen bond”; the term pnictogen bond designates a subset of the attractive interactions between an electrophilic region on a pnictogen atom in a molecular entity ...
Ellei toisin mainittu, julkisesti saatavilla olevia JYX-metatietoja (poislukien tiivistelmät) saa vapaasti uudelleenkäyttää CC0-lisenssillä.