M6_Microfluidics_for_CNT
Lataukset:
The hydrodynamic trap holds an incoming droplet until the arrival of following droplet. The previous droplet leaves the trap in very rapid manner.
Julkaisija
University of JyväskyläAsiasanat
Metadata
Näytä kaikki kuvailutiedotKokoelmat
- Tutkimusdata [260]
Samankaltainen aineisto
Näytetään aineistoja, joilla on samankaltainen nimeke tai asiasanat.
-
M4_Microfluidics_for_CNT
Borovsky, Jan (University of Jyväskylä, 2018)Size and frequency of the droplets produced in T-junction as a function of continuous and disperse phase pressure ratio. -
M7_Microfluidics_for_CNT
Borovsky, Jan (University of Jyväskylä, 2018)A comparation of two designs of a droplet trap. While the droplet exchange is mediated by direct droplet contact in the symmetric design, a short continuous phase plug mediated the droplet exchange in the asymmetric design. -
M11_Microfluidics_for_CNT
Borovsky, Jan (University of Jyväskylä, 2018)The subtle solubility of water in n-decane causes leaking of the droplet content. If the n-decane flows by static droplets, it carries the water slowly away up to the total disappearance of the droplets. -
M1_Microfluidics_for_CNT
Borovsky, Jan (2018)High-frequency droplet production in step-emulsification microfluidic device. The abrupt change in channel cross section causes creation of the droplets. The closely-packed droplets automatically order in hexagonal pattern. -
M3_Microfluidics_for_CNT
Borovsky, Jan (University of Jyväskylä, 2018)Droplet production in T-junction microfluidic device. The droplets are cut off from the water phase flow by pressure of oil. The droplets confined in the channel proceed at the same speed as the continuous phase.
Ellei toisin mainittu, julkisesti saatavilla olevia JYX-metatietoja (poislukien tiivistelmät) saa vapaasti uudelleenkäyttää CC0-lisenssillä.