M2_Microfluidics_for_CNT
Lataukset:
Droplet production in flow-focusing microfluidic device. The droplets are cut off from the water phase flow by pressure of oil from the side channels. The movement of the droplets proves laminar flow in the device.
Metadata
Näytä kaikki kuvailutiedotKokoelmat
- Tutkimusdata [284]
Samankaltainen aineisto
Näytetään aineistoja, joilla on samankaltainen nimeke tai asiasanat.
-
M7_Microfluidics_for_CNT
Borovsky, Jan (University of Jyväskylä, 2018)A comparation of two designs of a droplet trap. While the droplet exchange is mediated by direct droplet contact in the symmetric design, a short continuous phase plug mediated the droplet exchange in the asymmetric design. -
M4_Microfluidics_for_CNT
Borovsky, Jan (University of Jyväskylä, 2018)Size and frequency of the droplets produced in T-junction as a function of continuous and disperse phase pressure ratio. -
M11_Microfluidics_for_CNT
Borovsky, Jan (University of Jyväskylä, 2018)The subtle solubility of water in n-decane causes leaking of the droplet content. If the n-decane flows by static droplets, it carries the water slowly away up to the total disappearance of the droplets. -
M13_Microfluidics_for_CNT
Borovsky, Jan (University of Jyväskylä, 2018)Compared to pure water, the CNT dispersion has much lower interfacial tension at the dispersion – glass interface due to the presence of SDBS surfactant. Since the behavior of microfluidic system in the confined regime is ... -
M1_Microfluidics_for_CNT
Borovsky, Jan (2018)High-frequency droplet production in step-emulsification microfluidic device. The abrupt change in channel cross section causes creation of the droplets. The closely-packed droplets automatically order in hexagonal pattern.
Ellei toisin mainittu, julkisesti saatavilla olevia JYX-metatietoja (poislukien tiivistelmät) saa vapaasti uudelleenkäyttää CC0-lisenssillä.