Development of iron oxide / activated carbon nanoparticle composite for the removal of Cr(VI), Cu(II) and Cd(II) ions from aqueous solution
Jain, M., Yadav, M., Kohout, T., Lahtinen, M., Garg, V. K., & Sillanpää, M. (2018). Development of iron oxide / activated carbon nanoparticle composite for the removal of Cr(VI), Cu(II) and Cd(II) ions from aqueous solution. Water Resources and Industry, 20, 54-74. https://doi.org/10.1016/j.wri.2018.10.001
Julkaistu sarjassaWater Resources and Industry
© 2018 The Authors. Published by Elsevier B.V.
Iron oxide (Fe3O4) and iron oxide/activated carbon (Fe3O4/AC) were fabricated by co-precipitation method for the removal of Cr(VI), Cu(II) and Cd(II) ions from aqueous solution in batch mode. These nanoparticles were characterized by BET, FTIR, XRD, SEM/TEM and VSM. The optimum conditions for the removal of ions were pH = 2 for Cr(VI) and 6 for Cu(II) and Cd(II), initial metal ion concentration = 50 mg L−1, nanoparticle dose = 50 mg/10 mL, temperature = 25 ± 1 °C, shaking speed = 180 rpm and contact time = 3 h. The equilibrium data of ions sorption were well described by Langmuir, Freundlich, Redlich-Peterson and Intraparticle Diffusion model. The R2 values obtained by Langmuir model were highest by Fe3O4/AC for Cr(VI) = 0.9994,Cu(II) = 0.9998 and Cd(II)= 0.9750. The temperature dependent study in the range of 288–328 K confirmed that the adsorption process was endothermic in nature. Desorption studies with 0.1 M HCl stated that these nanoparticles can be regenerated effectively and can be used after four adsorption-desorption cycles without any mass loss. ...
MetadataNäytä kaikki kuvailutiedot
Näytetään aineistoja, joilla on samankaltainen nimeke tai asiasanat.
Bergna, Davide; Varila, Toni; Romar, Henrik; Lassi, Ulla (Elsevier BV, 2022)This study presents the effects of different activation methods to produce activated carbon from the hydrolysis lignin. Pretreatment of the feedstock with common mineral acids (HCL, HNO3, and H3PO4), different steam rates ...
Bazhenov, Andrey; Lefferts, Leon; Honkala, Karoliina (American Chemical Society, 2017)Rh and Pt are widely used as the components in heterogeneous catalysts for multiple industrial applications. Because the metals are typically in the form of nanoparticles in real catalysts, it is important to carefully ...
Study of Ni, Pt, and Ru Catalysts on Wood-based Activated Carbon Supports and their Activity in Furfural Conversion to 2-Methylfuran Mäkelä, Eveliina; Lahti, Riikka; Jaatinen, Salla; Romar, Henrik; Hu, Tao; Puurunen, Riikka L.; Lassi, Ulla; Karinen, Reetta (Wiley-VCH, 2018)Bio‐based chemicals can be produced from furfural through hydrotreatment. In this study, 2‐methylfuran (MF), a potential biofuel component, was produced with Pt, Ru, and Ni catalysts supported on wood‐based activated ...
Bergna, Davide; Varila, Toni; Romar, Henrik; Lassi, Ulla (MDPI AG, 2018)Activated carbons (ACs) can be produced from biomass in a thermal process either in a direct carbonization-activation process or by first carbonizing the biomass and later activating the bio-chars into activated carbons. ...
Lahti, Riikka; Bergna, Davide; Romar, Henrik; Hu, Tao; Comazzi, Alberto; Pirola, Carlo; Bianchi, Claudia L.; Lassi, Ulla (Springer, 2017)Cobalt catalysts are known to have a high activity and selectivity in the Fischer–Tropsch reaction converting synthesis gas to higher hydrocarbons (C5+). These catalysts have been supported by different porous materials. ...