Näytä suppeat kuvailutiedot

dc.contributor.authorToivanen, V.
dc.contributor.authorBellodi, G.
dc.contributor.authorKüchler, D.
dc.contributor.authorWenander, F.
dc.contributor.authorTarvainen, Olli
dc.date.accessioned2017-10-09T09:23:52Z
dc.date.available2017-10-09T09:23:52Z
dc.date.issued2017
dc.identifier.citationToivanen, V., Bellodi, G., Küchler, D., Wenander, F., & Tarvainen, O. (2017). Effect of double frequency heating on the lead afterglow beam currents of an electron cyclotron resonance ion source. <i>Physical Review Special Topics: Accelerators and Beams</i>, <i>20</i>(10), Article 103402. <a href="https://doi.org/10.1103/PhysRevAccelBeams.20.103402" target="_blank">https://doi.org/10.1103/PhysRevAccelBeams.20.103402</a>
dc.identifier.otherCONVID_27271840
dc.identifier.otherTUTKAID_75264
dc.identifier.urihttps://jyx.jyu.fi/handle/123456789/55586
dc.description.abstractThe effect of double frequency heating on the performance of the CERN GTS-LHC 14.5 GHz Electron Cyclotron Resonance (ECR) ion source in afterglow mode is reported. The source of the secondary microwave frequency was operated both in pulsed and continuous wave (CW) modes within the range of 12–18 GHz. The results demonstrate that the addition of the secondary frequency can significantly impact the extracted beam currents and the temporal stability of the beam during the afterglow discharge. For example, up to a factor of 2.6 increase was achieved for 208Pb35+ and a factor of 3.1 for 208Pb37+ compared to single frequency afterglow currents. It is shown that these effects are dependent on the choice of the secondary frequency with respect to the primary one and on the temporal synchronization between the two microwave sources. Overall, the results provide new insight into the afterglow discharge supporting the prevailing understanding of the physical processes behind the phenomenon.
dc.language.isoeng
dc.publisherAmerican Physical Society
dc.relation.ispartofseriesPhysical Review Special Topics: Accelerators and Beams
dc.relation.urihttps://journals.aps.org/prab/abstract/10.1103/PhysRevAccelBeams.20.103402
dc.subject.otherplasma production
dc.subject.otherheating
dc.titleEffect of double frequency heating on the lead afterglow beam currents of an electron cyclotron resonance ion source
dc.typearticle
dc.identifier.urnURN:NBN:fi:jyu-201710063947
dc.contributor.laitosFysiikan laitosfi
dc.contributor.laitosDepartment of Physicsen
dc.contributor.oppiaineKiihdytinlaboratoriofi
dc.contributor.oppiaineAccelerator Laboratoryen
dc.type.urihttp://purl.org/eprint/type/JournalArticle
dc.date.updated2017-10-06T09:15:12Z
dc.type.coarhttp://purl.org/coar/resource_type/c_2df8fbb1
dc.description.reviewstatuspeerReviewed
dc.relation.issn1098-4402
dc.relation.numberinseries10
dc.relation.volume20
dc.type.versionpublishedVersion
dc.rights.copyright© 2017 the Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License.
dc.rights.accesslevelopenAccessfi
dc.rights.urlhttps://creativecommons.org/licenses/by/4.0/
dc.relation.doi10.1103/PhysRevAccelBeams.20.103402
dc.type.okmA1


Aineistoon kuuluvat tiedostot

Thumbnail

Aineisto kuuluu seuraaviin kokoelmiin

Näytä suppeat kuvailutiedot

© 2017 the Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License.
Ellei muuten mainita, aineiston lisenssi on © 2017 the Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License.