Show simple item record

dc.contributor.advisorKataja, Markku
dc.contributor.advisorTuovinen, Tero
dc.contributor.authorMakkonen, Pekka
dc.date.accessioned2016-05-04T08:29:28Z
dc.date.available2016-05-04T08:29:28Z
dc.date.issued2016
dc.identifier.otheroai:jykdok.linneanet.fi:1529809
dc.identifier.urihttps://jyx.jyu.fi/handle/123456789/49638
dc.description.abstractThis work describes the deployment of the current fluid flow simulation software, Star-CCM+, at Valtra Inc. The text also gives a brief introduction to computational fluid dynamics and its role in the product development process for an engineer at the company. Two computational test cases are also described. A simpler case of the simulation of an engine air intake channel flow is shown first. The results show better agreement with the measured values than the outsourced simulation that was used as a reference. The second case is the so called underhood analysis which is a flow simulation of the whole Valtra N-series front end, including fan and heat exchangers. It is a steady state simulation using Multiple Reference Frame model for the fan. The results are in a good agreement with the outsourced transient simulation which was used a reference. The performance of the fan model is better than expected and the system mass flow is higher than the one in the reference simulation. When compared to the Limiting Ambient Temperature test the results show moderate agreement. The biggest differences between the simulations and measurement are seen at the performance of the charged air cooler.en
dc.format.extent1 verkkoaineisto (52 sivua)
dc.format.mimetypeapplication/pdf
dc.language.isofin
dc.rightsJulkaisu on tekijänoikeussäännösten alainen. Teosta voi lukea ja tulostaa henkilökohtaista käyttöä varten. Käyttö kaupallisiin tarkoituksiin on kielletty.fi
dc.rightsThis publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.en
dc.subject.othervirtauslaskenta
dc.subject.othersimulointi
dc.subject.otherCFD
dc.titleVirtauslaskenta traktorien tuotekehityksessä
dc.identifier.urnURN:NBN:fi:jyu-201605042420
dc.type.ontasotPro gradu -tutkielmafi
dc.type.ontasotMaster’s thesisen
dc.contributor.tiedekuntaMatemaattis-luonnontieteellinen tiedekuntafi
dc.contributor.tiedekuntaFaculty of Sciencesen
dc.contributor.laitosFysiikan laitosfi
dc.contributor.laitosDepartment of Physicsen
dc.contributor.yliopistoUniversity of Jyväskyläen
dc.contributor.yliopistoJyväskylän yliopistofi
dc.contributor.oppiaineSoveltava fysiikkafi
dc.contributor.oppiaineApplied Physicsen
dc.date.updated2016-05-04T08:29:29Z
dc.rights.accesslevelopenAccessfi
dc.type.publicationmasterThesis
dc.contributor.oppiainekoodi4023
dc.subject.ysovirtauslaskenta
dc.subject.ysosimulointi
dc.format.contentfulltext
dc.type.okmG2


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record