Measuring optical anisotropy in poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) films with added graphene
Isoniemi, T., Tuukkanen, S., Cameron, D. C., Simonen, J., & Toppari, J. (2015). Measuring optical anisotropy in poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) films with added graphene. Organic electronics, 25(October), 317-323. https://doi.org/10.1016/j.orgel.2015.06.037
Julkaistu sarjassa
Organic electronicsPäivämäärä
2015Tekijänoikeudet
© 2015 Elsevier B.V. This is a preprint version of an article whose final and definitive form has been published by Elsevier.
Graphene is a 2D nanomaterial having a great potential for applications in electronics and optoelectronics. Composites of graphene with conducting polymers have shown high performance in practical devices and their solution-processability enables low-cost and high-throughput mass manufacturing using printing techniques. Here we measure the effect of incorporation of graphene into poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) to the optical anisotropy, absorbance and conductivity of the film. Uniaxial anisotropy in PEDOT:PSS films has been thought to be caused by the spin-coating process used in fabrication. We have characterized spray- and spin-coated films using ellipsometry and total internal reflection spectroscopy, the latter especially for films too thick and uneven for ellipsometry, and show that spray-coating, similar to inkjet printing, also produces consistently anisotropic properties even in very thick and uneven films. Possible plasmonic excitations related to graphene are not seen in the films. The optical and electrical anisotropy of graphene/PEDOT:PSS enables routes to high performance devices for electronics, photonics and optoelectronics.
...
Julkaisija
Elsevier BV * North-HollandISSN Hae Julkaisufoorumista
1566-1199Asiasanat
Julkaisu tutkimustietojärjestelmässä
https://converis.jyu.fi/converis/portal/detail/Publication/24800282
Metadata
Näytä kaikki kuvailutiedotKokoelmat
Rahoittaja(t)
Suomen AkatemiaRahoitusohjelmat(t)
Akatemiaohjelma, SALisätietoja rahoituksesta
Funding from the Academy of Finland is grate-fully acknowledged (Projects 135193, 218182, 263868, 283011, 138146).Samankaltainen aineisto
Näytetään aineistoja, joilla on samankaltainen nimeke tai asiasanat.
-
Optical properties of conductive carbon-based nanomaterials
Isoniemi, Tommi (University of Jyväskylä, 2016)The interaction of light with carbon nanomaterials is the main focus of this thesis. I explore several nanostructured systems involving different allotropes of carbon, and characterize them both electrically, if applicable, ... -
Graphene transfer process based on gels.
Neuvonen, Santeri (2023)In this thesis, we suggest an alternative approach to graphene transfer by using gel materials as a support layer. The literature section focuses on graphene and its properties to find the optimal gel for the graphene ... -
Paraffin assisted graphene transfer
Thakur, Abhishek (2023)In this master’s thesis, we propose Paraffin support layer as an alternative to the well established and widely used PMMA for CVD grown Graphene transfer process. The motivation behind the project being to eliminate the ... -
Manufacturing of graphene nanodisks for surface plasmon measurements
Hakkola, Niko-Ville (2017)Grafeeni on ilmestynyt tieteen rintamalle kovalla ryminällä vasta viimeisen 13 vuoden aikana, mutta on jo nyt yksi mielenkiintoisimmista tutkimuskohteista, jolla voisi olla lukuisia sovelluksia tulevaisuudessa. Grafeeni ... -
Evaluation of radiation stability of electron beam irradiated Nafion® and sulfonated poly(ether ether ketone) membranes
Pajuste, E.; Reinholds, I.; Vaivars, G.; Antuzevičs, A.; Avotiņa, L.; Sprūģis, E.; Rossi, Mikko; Kettunen, Heikki; Meri, R.M.; Kaparkalējs, R. (Elsevier Ltd., 2022)Proton exchange membranes (PEM), which have been commonly used in fuel cells have raised interest for the application in harsh environments involving ionizing radiation. Therefore, radiation stability and ability to sustain ...
Ellei toisin mainittu, julkisesti saatavilla olevia JYX-metatietoja (poislukien tiivistelmät) saa vapaasti uudelleenkäyttää CC0-lisenssillä.